Shopping Cart
Your shopping cart is empty!

Kango 900 & 950 Parts

Kango 900 & 950 Parts

probably the largest selection of new and used Kango 900 & 950 spares in the Uk.

i have a lot of spares not listed on the website

please give me a call.

Sort By:
Show:
Display: List Grid
If you would like a copy of an old Kango service manual, please go to the download section on the homepage and select Kango 900 & 950 this manual is nearly 60 pages of detailed information. ..
£0.00 Ex Tax: £0.00
Kango 900 service kit
gaskets, seals, grease, supplied with diagrams & greasing information. ..
£31.80 Ex Tax: £26.50
Kango 950 service kit
Gaskets, seals & grease, supplied with diagrams and greasing information ..
£31.80 Ex Tax: £26.50
kango 900 & 950 service grease
A 400g tube of service grease, this is the replacement grease for the mobilplex 47. i can supply you with greasing information if needed, please ask. ..
£12.00 Ex Tax: £10.00
Kango 900 service kit
Gaskets, Seals, supplied with diagrams and greasing information. ..
£24.95 Ex Tax: £20.79
Kango 950 service kit
Gaskets, Seals, Supplid with diagrams & greasing information. ..
£24.95 Ex Tax: £20.79
side handle - kango 900 & 950
screw in side handle to fit a kango 900 & 950 in a clean / used condition. ..
£23.40 Ex Tax: £19.50
kango 900kv & 950kv top handle
a black top handle removed from a kango 900kv / 950kv in a clean / used condition this will included the lock button ..
£36.00 Ex Tax: £30.00
Kango 900 & 950 Top handle
A used Red top handle, which will fit the Kango 900 & 950 models  Lock button included ..
£33.60 Ex Tax: £28.00
kango 900 & 950 blue top handle
a blue top handle for a kango 900 / 950 breaker in a clean / used condition. lock button included. ..
£36.00 Ex Tax: £30.00
kango 900 / 950 lower handle
lower handle to a kango 900 or 950 breaker in a used condition some foam from the handle is missing. ..
£24.00 Ex Tax: £20.00
lock button - kango 900 & 950
lock button - kango 900 & 950 this button screws into the side of the top handle and locks the trigger on this will fit the blue, red & black handled kango 900 & 950 machines. ..
£10.20 Ex Tax: £8.50
kango 900kv & 950kv lower handle
a lower handle removed from a kango 900kv / 950kv this handle will only fit the black & yellow kv model kango's in a clean / used condition   ..
£26.40 Ex Tax: £22.00
kango 900 & 950 Conrod Bearing
A new bearing to fit the Kango 900 & 950 connecting rod. ..
£11.10 Ex Tax: £9.25
Kango 900 & 950 Connecting Rod
A used Kango 900 & 950 Connecting Rod, connects the crown wheel to the piston. ..
£25.20 Ex Tax: £21.00
kango 900 & 950 crown wheel / bevel gear bolt kit
This listing is for one Big End Kit for the kango 900 & 950 machines it consists of 5 parts a counter sunk bolt with an allen key head and a left hand thread, hardened to the same specification as the original a pin, which was machined, then hardened and then surface ground to the correct size a laser cut stainless steel washer a left hand threaded nut, manufactured to ..
£23.94 Ex Tax: £19.95
Kango 900 & 950 Crown Wheel / Bevel Gear
A used crown wheel for a Kango 900 & 950 machine.  ..
£60.00 Ex Tax: £50.00
kango 800 crown wheel
a kango 800 crown wheel with a straight cut gear in a used condition / working order this will not fit a kango 900 or 950, because of the straight cut gear.   ..
£36.00 Ex Tax: £30.00
pinion gear - kango 900 & 950
a new pinion gear for a kango 900 & 950 breaker ..
£23.40 Ex Tax: £19.50
kango 950 & 900 Piston & striker
kango 950 & 900 Piston & striker in a clean / used condition this is the smaller type the piston measures approx 31mm. ..
£23.40 Ex Tax: £19.50
Kango 900 & 950 Piston & striker
A used 36mm piston with striker, this will be supplied with two new seals. ..
£21.60 Ex Tax: £18.00
Kango 900 / 950 piston seals 36mm.
a pair of 36mm piston seals to fit the kango 900 & 950 machines ( 31mm seals also available ). ..
£9.95 Ex Tax: £8.29
kango 900 & 950  anvil seals
a pair of seals for the Kango 900 & 950 bottom piston ( anvil ). ..
£9.95 Ex Tax: £8.29
Kango 900 / 950 piston seals 31mm
31mm piston seals to fit the Kango 900 & 950 machines (36mm seals also available). ..
£9.95 Ex Tax: £8.29
round switch - kango 900 & 950
round switch to fit a kango 900 & 950 machine in a used condition / working order ..
£19.80 Ex Tax: £16.50
Kango 900 & 950 switch
A new switch for a Kango 900 & 950 machine     ..
£41.83 Ex Tax: £34.86
kango 900 & 950k armature & field coil
kango 900 & 950k 110v armature & field coil removed in working order on 07.02.2014 in a clean / used condition the fan blade has a small crack - please see the pictures. the pinion gear is still fitted, but should be replaced. ..
£42.00 Ex Tax: £35.00
kango 900 & 950 field coil
a 900w 110v field coil removed from a kango 900 / 950 breaker in a used condition working order when removed. ..
£26.40 Ex Tax: £22.00
kango 900 & 950 field coil
240v 900w electric motor field coil in a clean / used condition removed from a working machine ..
£26.40 Ex Tax: £22.00
kango 900 & 950 field coil
a field coil removed from a 240v - 1020w kango breaker in a used / clean condition working order when removed ..
£26.40 Ex Tax: £22.00
kango 900 & 950 armature bearing grease / dust cap
a grease / dust cap, fits under the top armature bearing on kango 900 & 950 breaker in a clean / used condition ..
£4.80 Ex Tax: £4.00
kango 900 & 950 electric motor
1 x kango 900 & 950 electric motor a 110v 1050w electric motor still fitted in the housing includes the armature, field coil, pinion gear & housing removed from a working kango on 24.01.2014 in a used condition / working order this is the easiest way of changing a kango motor. ..
£60.00 Ex Tax: £50.00
Kango armature bearing
Top Motor bearing - to fit a Kango 900 / 950. ..
£11.99 Ex Tax: £9.99
kango 900 & 950 field coil
field coil removed from a 110v kango 900 / 950 breaker in a clean / used condition working order when removed ..
£26.40 Ex Tax: £22.00
kango 800 electric motor
kango 800 electric motor 110v - 800w electric motor housing, armature & field coil working order when removed in a used condition - please see all photo's please note - this will not fit a 900 or 950 machine, because of the straight pinion gear. ..
£36.00 Ex Tax: £30.00
kango 900kv / 950kv electric motor
a 110v 1050w electric motor still in the housing this came from a black & yellow kango 900kv but will also fit a 950kv working order   ..
£60.00 Ex Tax: £50.00
kango 900 & 950 armature bearing
armature bearing for a kango 900 & 950 electric motor new bearing this bearing locates above the pinion gear ..
£9.36 Ex Tax: £7.80
kango 900 & 950 110v 900w armature
kango 900 & 950 110v 900w armature this was removed from a working kango on 07.20.2014  please note the fan blade has two chunks missing, this is the screw on type blade, so it can be removed if needed its from a 110v 900w machine. ..
£33.60 Ex Tax: £28.00
Kango 900 & 950 Tool Acceptance / nosing
tool acceptance to fit a kango 900 & 950 breaker this is the later twist type in a clean / used condition ..
£36.00 Ex Tax: £30.00
kango 900 / 950 latch pin repair kit
A new repair kit these are the parts that fit into the bottom nosing (tool acceptance) of a kango 900 & 950 breaker   ..
£14.40 Ex Tax: £12.00
Kango 900 & 950 Tool Acceptance
A used tool acceptance to fit the Kango 900 & 950 machines, in a clean / used condition. ..
£30.00 Ex Tax: £25.00
Kango 950 bottom piston & striker ( anvil )
A used bottom piston and striker for a Kango 950 machine, this will be supplied with two new seals. ..
£21.60 Ex Tax: £18.00
kango 900  anvil / piston & striker
a bottom piston & striker for kango 900 machine in a clean / used condition   ..
£21.60 Ex Tax: £18.00
kango 900 & 950 latchbar repair kit
kango 900 & 950 latchbar repair kit the kit contains : a new latchbar with a spring, ball bearing, retaining bar & roll pin this is for the push type latchbar / nosing the final picture showing the casting is for reference only & is not included   ..
£23.40 Ex Tax: £19.50
kango 900  anvil piston & striker
a bottom piston & sleeve for a kango 900kv ( black & yellow ) in a nice clean / used condition this will come with two new seals ..
£21.60 Ex Tax: £18.00
Kango 900 & 950 brush holders / housing
A used pair of brush holders in the housing to fit a Kango 900 & 950 machine. ..
£12.60 Ex Tax: £10.50
Kango 900 & 950 brushes
a pair of brushes for the Kango 900 & 950 machines. ..
£10.68 Ex Tax: £8.90
kango 900 & 950 brush holder
1 x New / old stock brush holder this will fit the kango 900 & 950 machines. comes with the black plastic screw on cap ..
£10.50 Ex Tax: £8.75
kango 900 & 950 brush caps
a pair of black plastic brush caps screw on caps. ..
£8.16 Ex Tax: £6.80
kango 900 & 950 round switch housing
a round switch housing with a black lid. in a used condition ..
£7.20 Ex Tax: £6.00
kango 900 & 950 switch housing
switch housing for the kango 900 & 950 breakers this housing will hold the round style of switch it comes with the traditional cover & a red style cover in a clean / used condition ..
£6.00 Ex Tax: £5.00
kango 900 / 950 switch cover
an aluminium switch cover removed from a kango 900 / 950 breaker in a nice clean / used condition ..
£4.80 Ex Tax: £4.00
Kango 900 & 950 switch push rods with plates
a used set of switch push rods with plates. in a used condition / working order. black push rods. ..
£6.96 Ex Tax: £5.80
kango 900 & 950 top handle push rod
this is the push rod that fits inside the top handle in a clean / used condition   ..
£4.80 Ex Tax: £4.00
Switch Push Rods / Plates
a set of switch push rods white rods in a used condition    ..
£6.96 Ex Tax: £5.80
kango 900 / 950 switch push rods
a set of red switch push rods for a kango 900 / 950 machine this type is generally used with a round style switch. in a clean / used condition ..
£7.80 Ex Tax: £6.50
Kango 950 Buffer housing
A used Buffer housing to fit a Kango 950 machine, in a nice clean / used condition. ..
£21.60 Ex Tax: £18.00
kango 900kv & 950 buffer housing
a buffer housing to fit the black & yellow kango 900kv / 950kv models in a clean / used condition this will need a bearing fitting if you want to use it on a 950kv ..
£21.60 Ex Tax: £18.00
kango 900kv / 950kv buffer spacer
a buffer spacer to fit the kango 900kv & 950kv models ( black & yellow ) in a clean / used condition ..
£20.40 Ex Tax: £17.00
kango 950 rotary driveshaft bearing
driveshaft bearing for the kango 950 breaker this bearing locates in the buffer housing and holds the bottom of the rotary driveshaft. ..
£9.36 Ex Tax: £7.80
Kango 950 buffer spacer
A used buffer housing spacer for a Kango 950 machine, this will be supplied with two new o'rings fitted. ..
£20.40 Ex Tax: £17.00
kango 900 buffer housing
a buffer housing for the kango 900 machine in a clean / used condition ..
£21.60 Ex Tax: £18.00
kango 900 buffer spacer
a buffer spacer to fit the kango 900 machine in a clean / used condition this will come supplied with two new o'rings. ..
£20.40 Ex Tax: £17.00
kango 900 & 950 insulator
A used kango 900 & 950 electric motor insulator in a nice clean / used condition ..
£9.00 Ex Tax: £7.50
kango 900 / 950 insulator
a used insulator, removed from a kango 900 / 950 breaker in a nice clean / used condition ..
£9.00 Ex Tax: £7.50
Kango 900 & 950k labels
a pair of Kango 950k labels well used  comes with screws 110v - 1050w i have loads of labels in stock, please let me know which type you need, and i will list them for you. ..
£4.80 Ex Tax: £4.00
water hose connection plate
water hose connection plate to fit a kango 900 & 950 machine in a clean / used condition   ..
£2.40 Ex Tax: £2.00
kango 900 & 950 cable locator
cable locator / insulator for a kango 900 / 950 breaker in a used condition i have a number of these in stock, all will be in a similar condition to the one pictured. ..
£4.20 Ex Tax: £3.50
kango 900kv & 950kv main ali housing
main housing to fit the kv model kangos in a used condition / working order ..
£24.00 Ex Tax: £20.00
Kango 950 clutch unit
A used clutch unit for a Kango 950 machine, in a nice clean / used condition, came from a working machine. ..
£21.60 Ex Tax: £18.00
kango 950 crown wheel housing
a used kango 950 gear housing / carrier in a nice / clean / used condition ..
£14.40 Ex Tax: £12.00
kango 900 & 950 bearing housing
bearing housing for the kango 900 & 950 machines this housing holds the bearing just above the pinion gear on the electric motor in a clean / used condition ..
£4.20 Ex Tax: £3.50
kango 900 gear housing
A gear housing for a kango 900 machine this holds the crown wheel ( bevel gear ) in a nice clean / used condition. ..
£14.40 Ex Tax: £12.00
bolts - bottom handle
a pair of kango handle bolts with washer and nut. in a used condition sold in pairs. ..
£1.80 Ex Tax: £1.50
kango 637 tool acceptance / nosing
kango 637 tool acceptance / nosing in a nice clean / used condition / working order ..
£18.00 Ex Tax: £15.00
Kango 637 piston seals
A pair of piston seals for the Kango 637 machine. ..
£10.02 Ex Tax: £8.35